FREE SHIPPING
Free shipping on all US order or order above $200
WDR-480
135.16
Details
Meanwell WDR-480 Series is 480W Single Output Industrial DIN RAIL Power Supply. The entire series adapt to be installed on TS-35/7.5 or 15 mounting rails. Since the body is 85.5 mm in width, the design could save a lot of space inside the cabinet. In addition, WDR-480 Series adopts Single and two phase wide input range 180~550VAC, and conforms to BS EN/EN61000-6-2, the norm the European Union regulates for harmonic current. At the same time, WDR-480 is designed with metal housing that enhances the power dissipation. With the high efficiency up to 92% and low power dissipation, WDR-480 Series could operate at the ambient temperature between -30℃ and 70℃ under free air convection. Moreover, they provide various protections such as Short circuit/Overload/Over voltage/Over temperature. The complete protection functions and relevant certificates for industrial control apparatus (UL508, EAC TP TC 004 approved, IEC62368-1 CB) permit WDR-480 series a very competitive power supply solution for industrial applications.
Meanwell WDR-480 Series Model Specifications
| Model | WDR-480-24 | WDR-480-48 | |
| Output | DC VOLTAGE | 24V | 48V |
| RATED CURRENT | 20A | 10A | |
| CURRENT RANGE | 0-20A | 0-10A | |
| RATED POWER | 480W | 480W | |
| RIPPLE & NOISE (max.) | 100mVp-p | 150mVp-p | |
| VOLTAGE ADJ. RANGE | 24-28V | 48-55V | |
| VOLTAGE TOLERANCE | ±1.0% | ±1.0% | |
| LINE REGUL ATION | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±1.0% | ±1.0% | |
| SETUP, RISE TIME | 800ms, 150ms/400VAC 2000ms, 150ms/230VAC at full load | ||
| HOLD UP TIME (Typ.) | 18ms / 400VAC 16ms / 230VAC at full load | ||
| Input | VOLTAGE RANGE | 180 ~ 550VAC 254 ~ 780VDC | |
| FREQUENCY RANGE | 47 - 63Hz | ||
| POWER FACTOR (Typ.) | PF>=0.84/400VAC PF>=0.84/230VAC | ||
| EFFICIENCY (Typ.) | 92% | ||
| AC CURRENT (Typ.) | 1.6A/400VAC 4A/230VAC | ||
| INRUSH CURRENT (Typ. ) | COLD START 50A | ||
| LEAKAGE CURRENT | <3.5mA / 530VAC | ||
| PROTECTION | OVERLOAD | 105 ~ 130% rated output power | |
| Protection type : Constant current limiting, unit will shut down after 3 sec. ,auto-recovery after 1 minute if the fault condition is removed | |||
| OVER VOLTAGE | 29 ~ 33V | 56 ~ 65V | |
| Protection type : Shut down o/p voltage, auto-recovery after 1 minute if the fault condition is removed | |||
| OVER TEMPERATURE | 95℃±5℃ (TSW) detect on heatsink of power switch | ||
| Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | |||
| FUNCTION | DC OK REALY CONTACT RATINGS max | 60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load | |
| ENVIRONMENT | WORKING TEMP | -30 ~ +70℃ (Refer to "Derating Curve") | |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | ||
| STORAGE TEMP., HUMIDITY | -40 ~ +85℃, 10 ~ 95% RH | ||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | ||
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | ||
| SAFETY &EMC | SAFETY STANDARDS | UL508,EAC TP TC 004 approved,IEC62368-1 CB approved by SIQ,design refer to BS EN/EN62368-1, AS/NZS 62368.1,GL; (meet BS EN/EN60204-1) | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH | ||
| EMC IMMUNITY | Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 | ||
| EMC IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3, heavy industry level, criteria A, EAC TP TC 020 approved | ||
| Others | MTBF | 112.8K hrs min. MIL-HDBK-217F (25℃) | |
| DIMENSION | 85.5*125.2*128.5mm (W*H*D) | ||
| PACKING | 1.7Kg; 8pcs/14.6Kg/0.9CUFT | ||
Meanwell WDR-480 Series Features
l Single and two phase wide input range 180~550VAC
l Built-in active PFC circuit compliance to BS EN/EN61 000-3-2
l High efficiency 93% and low power dissipation
l Protections:Short circuit/Overload/Over voltage/Over temperature
l Cooling by free air convection
l Can be installed on DIN rail TS-35/7.5 or15
l UL 508 (industrial control equipment) approved
l BS EN/EN6 1000-6-2 (BS EN/EN50082-2) industrial immunity level
l Built-in DC OK relay contact
l 100% full load burn-in test
l 3 years warranty
Meanwell WDR-480 Series Mechanical Diagram
More Information
| Brand | Meanwell |
|---|
Custom Tab
Abundant supply to meet market demand. The warehouse is rich in goods with all kinds of commodities, which Can meet the needs of different customers.
Fast delivery and high efficiency. The warehouse has sufficient supply, when customers need to order, we can quickly find the goods, and deliver out, which effectively improves the efficiency and saves valuable time for customers
Our products have more advantages in price. We always believe that you should enjoy higher quality with lower price. Therefore, we are committed to providing consumers with the most cost-effective products.
No matter how great our goals are, or how many great things waiting for us to do, we must keep our promises and do it well. Because these is one word that cannot be missing in the secret of success. That is "integrity".
Reviews 2
Write Your Own Review
Related Products By Brand
DELIVERY & RETURNS
Custom static block for product detail
SUPPORT 24/7
Contact us 24 hours a day, 7 days a week
30 DAYS RETURN
Simply return it within 30 days for an exchange.
100% PAYMENT SECURE
We ensure secure payment with PEV