FREE SHIPPING
Free shipping on all US order or order above $200
DRC-40A
25.02
Details
Meanwell DRC-40A is 40W AC/DC Single Output DIN rail type security power supply with CH1CH213.8V13.8V1.9A1A0-2.9A40.02W120mVp-pCH1:12-15V. The product could be mounted on DIN rail TS-35/7.5 or 15, and the width is just 40mm. so well suited for the installation in limited spacing. Apart from the primary output, there is a charger output with smaller rated current, enabling the backup power supply application the security access systems require. At the same time, DRC-40A accepts the universal input between 90V AC and 264VAC, and supplies 13.8VDC and 27.6VDC at output. Since the efficiency reaches up to 87%, DRC-40A could operate with air convection cooling under -30℃ through 70℃. In addition to the key protection features such as overload protection, over voltage protection, battery low cut off, and battery reverse polarity protection (by fuse), the alarm signal for AC OK and battery low signaling is equipped as well, via TTL open collector output for the standard model (via relay contact output as the optional model), to facilitate the system design. Due to its high efficiency, excellent reliability and long lifespan. Meanwell DRC-40A serves as an ideal power supply solution for industrial applications.
Meanwell DRC-40A Encoding
| DRC | Series Name |
| 40 | Output wattage |
| A | Output Voltage |
Meanwell DRC-40A Specifications
| Model | DRC-40A | ||
| OUTPUT | OUTPUT NUMBER | CH1 | CH2 |
| DC VOLTAGE | 13.8V | 13.8V | |
| RATED CURRENT | 1.9A | 1A | |
| CURRENT RANGE | 0-2.9A | ----- | |
| RATED POWER | 40.02W | ||
| RIPPLE & NOISE (max.) | 120mVp-p | ---- | |
| VOLTAGE ADJ. RANGE | CH1:12-15V | ||
| VOLTAGE TOL ERANCE | ±1.0% | ---- | |
| LINE REGULATION | ±0.5% | ---- | |
| LOAD REGULATION | ±0.5% | ---- | |
| SETUP, RISE TIME | 400ms, 50ms/230VAC 800ms, 50ms/115VAC at full load | ||
| HOLD UP TIME (Typ.) | 50ms/230VAC 10ms/115VAC at full load | ||
| INPUT | VOLTAGE RANGE | 90 ~ 264VAC 127 ~ 370VDC [DC input operation possible by connecting AC/L(+), AC/N(-)] | |
| FREQUENCY RANGE | 47 ~ 63Hz | ||
| POWER FACTOR (Typ.) | PF≧0.95/230VAC PF≧0.98/115VAC at full load | ||
| EFFICIENCY (Typ.) | 86.00% | ||
| AC CURRENT (Typ.) | 0.8A/115VAC 0.6A/230VAC | ||
| INRUSH CURRENT(Typ.) | COLD START 30A/115VAC 60A/230VAC | ||
| PROTECTION | OVERL OAD | 105 ~ 150% rated output power | |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | |||
| OVER VOLTAGE | CH1:14.49 ~ 18.63V | ||
| Protection type : Shut down o/p voltage, re-power on to recover | |||
| BATTERY CUT OFF | 10±0.5V | ||
| FUNCTION | AC OK | Open collector output, CONTACT : AC OK ; CUT OFF : AC Fail ; max. rating : 50V/30mA | |
| BATTERY LOW | Open collector output, CUT OFF : Battery ; CONTACT : Battery Low ; max. rating : 50V/30mA | ||
| Battery low voltage : < 11V | |||
| ENVIRONMENT | WORKING TEMP. | -30 ~ +70℃ (Refer to "Derating Curve") | |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||
| STORAGE TEMP., HUMIDITY | -20 ~ +85℃, 10 ~ 95% RH | ||
| TEMP. COEFFICIENT | ±0.03%/℃ (0~50℃) on CH1 output | ||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | ||
| SAFETY & EMC | SAFETY STANDARDS | UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, AS/NZS 60950.1 approved | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | ||
| EMC EMISSION | Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020 | ||
| EMS IMMUNITY | Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61204-3, light industry level, EAC TP TC 020 | ||
| OTHERS | MTBF | 2496.2K hrs min. Telcordia SR-332 (Bellcore) ; 536.6K hrs min. MIL-HDBK-217F (25℃) | |
| DIMENSION | 40*90*100mm (W*H*D) | ||
| PACKING | 0.3Kg; 42pcs/13.6Kg/0.82CUFT | ||
Meanwell DRC-40A Features
l Pass LPS
l LED indicator for power on
l 100% full load burn-in test
l 3 years warranty
l Universal AC input/Full range
l Protections: Short circuit/Overload/Over voltage
l Battery low protection/ Battery reverse polarity protection by fuse
l Can be installed on DIN rail TS-35/7.5 or 15
l Alarm signal for AC OK and Battery low (via TTL open collector, optional via relay)
l Cooling by free air convection
Meanwell DRC-40A Applications
l Security system
l Alarm system
l DC UPS system
l Central monitoring system
l Access systems
l Emergency lighting system
Meanwell DRC-40A Mechanical Diagram
More Information
| Brand | Meanwell |
|---|
Custom Tab
Abundant supply to meet market demand. The warehouse is rich in goods with all kinds of commodities, which Can meet the needs of different customers.
Fast delivery and high efficiency. The warehouse has sufficient supply, when customers need to order, we can quickly find the goods, and deliver out, which effectively improves the efficiency and saves valuable time for customers
Our products have more advantages in price. We always believe that you should enjoy higher quality with lower price. Therefore, we are committed to providing consumers with the most cost-effective products.
No matter how great our goals are, or how many great things waiting for us to do, we must keep our promises and do it well. Because these is one word that cannot be missing in the secret of success. That is "integrity".
Reviews 2
Write Your Own Review
Related Products By Brand
DELIVERY & RETURNS
Custom static block for product detail
SUPPORT 24/7
Contact us 24 hours a day, 7 days a week
30 DAYS RETURN
Simply return it within 30 days for an exchange.
100% PAYMENT SECURE
We ensure secure payment with PEV